 |
|
|
|
Next: Small Suzuki conversion
|
| Author |
Message |
External
Since: Feb 28, 2004
Posts: 52
|
(Msg. 1) Posted: Tue Dec 21, 2004 9:40 am
Post subject: Hydra Sports Advice
Archived from groups: rec>boats (more info?)
|
|
|
I'm considering purchasing a '97 Hydra-Sports Ocean 22 and wonder if
anyone has any experience with this boat. I'll use it primarily for
bay fishing with occasional offshore trips in the Gulf. My main
concern is construction - does anyone know if the transom/stringers
are wood or composite? Secondary is ride - especially in 4-6' seas.
Also wondering about the Evinrude 200 Ocean Pro ('97 as well). Any
advice would be greatly appreciated. |
|
| Back to top |
|
 | |
External
Since: Dec 11, 2004
Posts: 543
|
(Msg. 2) Posted: Tue Dec 21, 2004 12:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Tue, 21 Dec 2004 14:07:46 GMT, tomcarlsonREMOVE.RemoveThis@sbcglobal.net (Tom)
wrote:
>I'm considering purchasing a '97 Hydra-Sports Ocean 22 and wonder if
>anyone has any experience with this boat. I'll use it primarily for
>bay fishing with occasional offshore trips in the Gulf. My main
>concern is construction - does anyone know if the transom/stringers
>are wood or composite? Secondary is ride - especially in 4-6' seas.
>Also wondering about the Evinrude 200 Ocean Pro ('97 as well). Any
>advice would be greatly appreciated.
Highly recommended for the type of fishing you contemplate. The
offshore thing in the Gulf is always problem, but the nice thing is
you can make the run back in a hurry. There is plenty of fishing room
on the foredeck - the aft deck is problematic unless you have the
runabout/walkthru version in which case, the reverse it true.
It's a little twitchy in terms of stability when running, but the ones
that I've ridden in and fished out of were more than adequate. I
wouldn't press my luck with more than three folk fishing at the same
time. As always, engine trim on boats of this class has a lot to do
with how the ride is. On boats that I've been on, that does not seem
to be a problem like it is with my Ranger which is a comparable boat.
The problem with this boat isn't the stringers, but the transom, in
particular around the engine mounts. Minor stress cracks where the
engine is mounted is acceptable, but stress cracks along the top of
the transom where the engine is mounted aren't.
You might want to tap out the bottom for blisters or have it looked
over by a pro. This is not a normal problem for Hydra Sports, but it
pays to be sure. If this boat has hydraulic steering, check the hoses
for cracks and leaks at the ram.
With regard to the engine, this was a transition year for
Evinrude/Johnson/OMC. Assuming that the engine has been running
relatively problem free since it was new, then I wouldn't worry about
it unless you have extreme hours on it. With engines of this vintage
and because it is a transition era Evinrude, it would be a good idea
to determine how many hours are on the engine, have it compression
checked, have a mechanic scope out the cylinders to check for
excessive wear, pull the lower unit and have the seals pressure tested
and just for the hell of it, changed anyway, prop shaft should be
mic'd to see if it's out of round or bent and change the gear oil just
because.
I would also check the trim fluid just to be sure.
Other than that, just be careful with the purchase, ask lot's of
questions, make sure this is what you really want and if the Fishing
Gods smile on you, you will have a pretty decent fishing boat.
Good luck. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Feb 28, 2004
Posts: 52
|
(Msg. 3) Posted: Tue Dec 21, 2004 3:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks for the reply and good info. See more below:
>It's a little twitchy in terms of stability when running, but the ones
>that I've ridden in and fished out of were more than adequate. I
>wouldn't press my luck with more than three folk fishing at the same
>time. As always, engine trim on boats of this class has a lot to do
>with how the ride is. On boats that I've been on, that does not seem
>to be a problem like it is with my Ranger which is a comparable boat.
I had a '21 Mako that was kinda touchy - especially when trimmed out
but hyd. trim tabs stabilized pretty well and this one has them - hope
the result is the same.
>
>The problem with this boat isn't the stringers, but the transom, in
>particular around the engine mounts. Minor stress cracks where the
>engine is mounted is acceptable, but stress cracks along the top of
>the transom where the engine is mounted aren't.
So this has a wooden transom??
>
>You might want to tap out the bottom for blisters or have it looked
>over by a pro. This is not a normal problem for Hydra Sports, but it
>pays to be sure. If this boat has hydraulic steering, check the hoses
>for cracks and leaks at the ram.
>
>With regard to the engine, this was a transition year for
>Evinrude/Johnson/OMC. Assuming that the engine has been running
>relatively problem free since it was new, then I wouldn't worry about
>it unless you have extreme hours on it. With engines of this vintage
>and because it is a transition era Evinrude, it would be a good idea
>to determine how many hours are on the engine, have it compression
>checked, have a mechanic scope out the cylinders to check for
>excessive wear, pull the lower unit and have the seals pressure tested
>and just for the hell of it, changed anyway, prop shaft should be
>mic'd to see if it's out of round or bent and change the gear oil just
>because.
Has 280 hours - supposedly problem free until he hit a sandbar in '03
- replaced the lower unit with factory new. I can do a compression
test but a mechanic checkout would be a good idea.
>
>I would also check the trim fluid just to be sure.
>
>Other than that, just be careful with the purchase, ask lot's of
>questions, make sure this is what you really want and if the Fishing
>Gods smile on you, you will have a pretty decent fishing boat.
I'll do that. I'm also looking at a couple of newer boats but this is
about half the price and it's tempting to pay cash rather than finance
part. Maybe upgrade in a couple of years when more 4 strokes hit the
used market. Just don't want to get stuck with a "problem child" -
boats are a deep enough hole in the water as it is.
>
>Good luck.
Thanks - again, I appreciate the help. Take care.
Tom............. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Dec 11, 2004
Posts: 543
|
(Msg. 4) Posted: Tue Dec 21, 2004 3:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Tue, 21 Dec 2004 19:41:31 GMT, tomcarlsonREMOVE DeleteThis @sbcglobal.net (Tom)
wrote:
>Thanks for the reply and good info. See more below:
>>It's a little twitchy in terms of stability when running, but the ones
>>that I've ridden in and fished out of were more than adequate. I
>>wouldn't press my luck with more than three folk fishing at the same
>>time. As always, engine trim on boats of this class has a lot to do
>>with how the ride is. On boats that I've been on, that does not seem
>>to be a problem like it is with my Ranger which is a comparable boat.
>I had a '21 Mako that was kinda touchy - especially when trimmed out
>but hyd. trim tabs stabilized pretty well and this one has them - hope
>the result is the same.
>>
>>The problem with this boat isn't the stringers, but the transom, in
>>particular around the engine mounts. Minor stress cracks where the
>>engine is mounted is acceptable, but stress cracks along the top of
>>the transom where the engine is mounted aren't.
>
>So this has a wooden transom??
It's a wood core, but that isn't the issue. It's the way the
fiberglass was laid on some boats. This wasn't across the whole
product line - it was strictly some of the Ocean Runner series. The
stringers are composite.
>>You might want to tap out the bottom for blisters or have it looked
>>over by a pro. This is not a normal problem for Hydra Sports, but it
>>pays to be sure. If this boat has hydraulic steering, check the hoses
>>for cracks and leaks at the ram.
>>
>>With regard to the engine, this was a transition year for
>>Evinrude/Johnson/OMC. Assuming that the engine has been running
>>relatively problem free since it was new, then I wouldn't worry about
>>it unless you have extreme hours on it. With engines of this vintage
>>and because it is a transition era Evinrude, it would be a good idea
>>to determine how many hours are on the engine, have it compression
>>checked, have a mechanic scope out the cylinders to check for
>>excessive wear, pull the lower unit and have the seals pressure tested
>>and just for the hell of it, changed anyway, prop shaft should be
>>mic'd to see if it's out of round or bent and change the gear oil just
>>because.
>
>Has 280 hours - supposedly problem free until he hit a sandbar in '03
>- replaced the lower unit with factory new. I can do a compression
>test but a mechanic checkout would be a good idea.
If he hit the sandbar hard enough to break the lower unit, then I
would consider the engine suspect. Not bad (because I've done this
myself and the engine was fine), just have it looked over. Pay a good
mechanic that knows Evinrudes an hours worth of time to check it.
280 hours isn't all that much for a '97 - less than 40 per year - not
unheard of certainly. Actually, I would have preferred to see more
hours on the engine for it's age.
>>I would also check the trim fluid just to be sure.
>>
>>Other than that, just be careful with the purchase, ask lot's of
>>questions, make sure this is what you really want and if the Fishing
>>Gods smile on you, you will have a pretty decent fishing boat.
>
>I'll do that. I'm also looking at a couple of newer boats but this is
>about half the price and it's tempting to pay cash rather than finance
>part. Maybe upgrade in a couple of years when more 4 strokes hit the
>used market. Just don't want to get stuck with a "problem child" -
>boats are a deep enough hole in the water as it is.
Around this area, with trailer in good condition, everything being
relatively equal, these are running from $14,500 to $21,000 depending
on the engine/electronics package. I have seen one somewhere, can't
remember where, for around $10,000 - don't know if there was wrong
with it.
There are a ton of boats for sale out there. I'm considering selling
my Ranger this coming Spring, but there are a god awful bunch of boats
out there for sale - it's incredible.
Hopefully, you've stumbled into something good.
>>Good luck.
>
>Thanks - again, I appreciate the help. Take care.
Let us know what happens and how you make out. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Feb 28, 2004
Posts: 52
|
(Msg. 5) Posted: Tue Dec 21, 2004 4:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
>It's a wood core, but that isn't the issue. It's the way the
>fiberglass was laid on some boats. This wasn't across the whole
>product line - it was strictly some of the Ocean Runner series. The
>stringers are composite.
Don't you still run into potential problems if mounting holes weren't
sealed properly?
>If he hit the sandbar hard enough to break the lower unit, then I
>would consider the engine suspect. Not bad (because I've done this
>myself and the engine was fine), just have it looked over. Pay a good
>mechanic that knows Evinrudes an hours worth of time to check it.
I'll have to find out more about it - it was replaced with a factory
new unit and hopefully the mechanic would have checked it out but you
never know..
>
>280 hours isn't all that much for a '97 - less than 40 per year - not
>unheard of certainly. Actually, I would have preferred to see more
>hours on the engine for it's age.
It's been used entirely in fresh water so no long runs offshore. One
concern is that it was used for Striper fishing (has downriggers so
obviously some trolling time).
>Around this area, with trailer in good condition, everything being
>relatively equal, these are running from $14,500 to $21,000 depending
>on the engine/electronics package. I have seen one somewhere, can't
>remember where, for around $10,000 - don't know if there was wrong
>with it.
What part of the country are you in? Those seem to be a little high
(NADA low retail is $11,050 - high retail is $13,585 on this boat ) -
is that a pretty accurate guide? Maybe I should buy this one and bring
it to your part of the country.  .
>
>There are a ton of boats for sale out there. I'm considering selling
>my Ranger this coming Spring, but there are a god awful bunch of boats
>out there for sale - it's incredible.
There are quite a few. I figure if I'm going to buy at this time of
the year it should be a bargain - otherwise I might as well wait until
later in the spring.
>
>Hopefully, you've stumbled into something good.
I hope so - time will tell.
Thanks again. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Dec 11, 2004
Posts: 543
|
(Msg. 6) Posted: Tue Dec 21, 2004 6:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Tue, 21 Dec 2004 21:02:11 GMT, tomcarlsonREMOVE DeleteThis @sbcglobal.net (Tom)
wrote:
>
>>It's a wood core, but that isn't the issue. It's the way the
>>fiberglass was laid on some boats. This wasn't across the whole
>>product line - it was strictly some of the Ocean Runner series. The
>>stringers are composite.
>
>Don't you still run into potential problems if mounting holes weren't
>sealed properly?
Yes - but I'm assuming that isn't a problem. It COULD be a problem
for you. :>)
What I was talking about was the way the glass was laid along the top
of the transom and a potential glass/backing problem in the transom
itself. As I said, there weren't a lot of these boats with that
problem, but it did exist.
>>If he hit the sandbar hard enough to break the lower unit, then I
>>would consider the engine suspect. Not bad (because I've done this
>>myself and the engine was fine), just have it looked over. Pay a good
>>mechanic that knows Evinrudes an hours worth of time to check it.
>
>I'll have to find out more about it - it was replaced with a factory
>new unit and hopefully the mechanic would have checked it out but you
>never know..
That's exactly it - you never know. I'm not an expert by any means,
but I hang around a sales/service shop when nothing else is going on
(I know the owner and the service manager) and I see "things" that you
might not realize can happen when lower units hit stuff. Just be
careful - doesn't mean the engine is junk.
>>280 hours isn't all that much for a '97 - less than 40 per year - not
>>unheard of certainly. Actually, I would have preferred to see more
>>hours on the engine for it's age.
>
>It's been used entirely in fresh water so no long runs offshore. One
>concern is that it was used for Striper fishing (has downriggers so
>obviously some trolling time).
Low speed isn't a critical issue - not at less than 40 hours a year.
>>Around this area, with trailer in good condition, everything being
>>relatively equal, these are running from $14,500 to $21,000 depending
>>on the engine/electronics package. I have seen one somewhere, can't
>>remember where, for around $10,000 - don't know if there was wrong
>>with it.
>
>What part of the country are you in? Those seem to be a little high
>(NADA low retail is $11,050 - high retail is $13,585 on this boat ) -
>is that a pretty accurate guide? Maybe I should buy this one and bring
>it to your part of the country. .
I live in CT and are certainly welcome to try it - you might have to
wait for a while.
With respect to NADA, I've found them to be fairly accurate, but there
are regional differences. BUC often seems way higher, but allows for
condition adjustments that NADA doesn't.
>>There are a ton of boats for sale out there. I'm considering selling
>>my Ranger this coming Spring, but there are a god awful bunch of boats
>>out there for sale - it's incredible.
>
>There are quite a few. I figure if I'm going to buy at this time of
>the year it should be a bargain - otherwise I might as well wait until
>later in the spring.
>>
>>Hopefully, you've stumbled into something good.
>
>I hope so - time will tell.
>Thanks again.
No problem - good luck.
Later,
Tom >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Feb 28, 2004
Posts: 52
|
(Msg. 7) Posted: Wed Dec 22, 2004 7:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Decided to pass - boat looked OK but needed cosmetic touch-ups - seats
mainly - so I'll keep looking. Sure do appreciate all the advice and
comments. Thanks again - probably will be back with more questions
when I find the next prospect. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Dec 11, 2004
Posts: 543
|
(Msg. 8) Posted: Wed Dec 22, 2004 9:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Wed, 22 Dec 2004 23:24:24 GMT, tomcarlsonREMOVE DeleteThis @sbcglobal.net (Tom)
wrote:
>Decided to pass - boat looked OK but needed cosmetic touch-ups - seats
>mainly - so I'll keep looking. Sure do appreciate all the advice and
>comments. Thanks again - probably will be back with more questions
>when I find the next prospect.
You don't need to stick to Hydra Sports. If I were looking, I'd keep
the Hydra Sports in mind, but stretch the horizons a little -
Aquasport, Mako are all good brands of that vintage.
Of course, now you know why the price was what it was. :>)
Good luck.
Later,
Tom >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
External
Since: Feb 28, 2004
Posts: 52
|
(Msg. 9) Posted: Thu Dec 23, 2004 12:40 pm
Post subject: Re: Hydra Sports Advice [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
>You don't need to stick to Hydra Sports. If I were looking, I'd keep
>the Hydra Sports in mind, but stretch the horizons a little -
>Aquasport, Mako are all good brands of that vintage.
>
>Of course, now you know why the price was what it was. :>)
I've had Aquasport and Mako and wouldn't hesitate to buy again. I also
like the looks of Sea-Pro and Champion. I'm not stuck on any brand,
just a suitable layout, quality construction, good ride etc. at a good
price. Actually, the boat wasn't a bad buy. I planned to buy a newer
boat but had this one been what I was looking for at 1/2 the price it
would have been tempting - I just didn't want to go through the hassle
of replacing seat covers etc. It also appeared to draw quite a bit of
water and I'll be fishing a fairly shallow bay so I would prefer
something with a shallower draft. Oh well, the search continues. >> Stay informed about: Hydra Sports Advice |
|
| Back to top |
|
| |
| Related Topics: | Hydra-Sports question - I'm looking at a 2001 Hydra-Sports 22' LTS with a 200 Evinrude and would appreciate any comments anyone may have about this boat. I'm primarily interested in whether it provides a decent dry ride - particularly offshore in 2-4 ft. seas. I've seen comment...
Sea Rayder f16-95 120hp sports jet - Sea rayder a fun boat that i enjoyed last summer but what happaned during winterstorage. When prepared it for my first time in the water this year it just wouldn`t start. When i checked for spark i noticed that it was gone. after talking to the local..
O/T Sports Illustrated magazine? - Anyone buy the Sports Illustrated magazine?....other than the swimsuit issue? Current version is supposed to have an article on a local kid playing hockey in the Quebec Major Jr Hockey League. His name is Sidney Crosby, and some writers think he could be...
The real sports news... - this post is not archived.
A really nice sports story - Ali's legacy celebrated in style by stars of the universe By Ron Lewis London Times Our correspondent visits Louisville to witness a grateful city and a host of dignitaries pay homage to the greatest boxer in history CUTTING a ribbon was never going to... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
